• Categories:Encyclopedia of Doors and Windows
• Author:
• Origin:
• Time of issue:2020-05-23 18:00
• Views:

(Summary description)Nowadays, broken bridge aluminum doors and windows are more and more favored by owners, but many people do not pay attention to the maintenance of doors and windows, which leads to a reduction in the service life of doors and windows. Now I will tell you 7 common sense of maintenance, come and learn the main points.



1. When cleaning the aluminum doors and windows of the broken bridge, people must not step on the aluminum frame, nor pull the frame as a support.

2. The sealing top and glass glue are the key to ensure the sealing, heat preservation and waterproofing of the aluminum doors and windows of the broken bridge. If they fall off, they should be repaired and replaced in time.

3. Broken bridge aluminum doors and windows can be wiped with a soft cloth dampened with water or neutral detergent. Do not use ordinary soap and detergent, let alone detergent with strong acid and alkali such as decontamination powder and toilet detergent.



4. After a rainy day, wipe the raindrops on the glass and door and window frames in time, pay special attention to the accumulation of water in the chute.

5. Frequently check the tightening of bolts, positioning shafts, wind braces, floor springs, etc., and timely replace damaged parts and vulnerable parts of aluminum alloy doors and windows. Lubricate regularly to keep it clean and flexible.

6. During the use of broken aluminum doors and windows, you should push and pull gently. Push and pull let it go. If you find it is difficult to open and close, do not push and pull the doors and windows forcibly. You should troubleshoot first. Dust accumulation and deformation are the main reasons for the difficulty of pushing and pulling aluminum alloy doors and windows. Keep the door frame clean, especially the pull groove. A vacuum cleaner can be used to remove the dust accumulated in the groove and the door seal top.

7. Frequently check the wall joints of the aluminum door and window frame of the broken bridge. If it becomes loose over time, it will easily deform the frame as a whole, so that the doors and windows cannot be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement to seal with epoxy super glue.



With regard to the use and cleaning of broken bridge aluminum doors and windows, if we can do our best to achieve the above seven points, I believe that the service life of broken bridge aluminum doors and windows can be better increased.